Flexible PCB & Rigid Flex PCB Manufacturer

PCB Manufacturing Services

» PCB Manufacturing Services

PCB Manufacturing Services


Titan PCB offers a PCB Manufacturing Service for your PCB designs from a wide range of design programs.

Our PCB Manufacturing Service can produce single or double sided boards with optional solder mask and silk screening at very reasonable prices.

Quantities start from just one pcb prototype to large manufacturing quantities, with all printed circuit boards manufactured to our high quality standards, with fast turnaround times.

Titan PCBS Manufacturing Capabilities


Items Manufacturing Capabilities Remarks
Number of Layers 1-10 layers For orders above 10 layers,please view the below “Standard PCB” or contact our sales rep.
Material FR-4,Aluminum For Flex, Rigid-flex, Metal-based (Aluminum etc.,), HDI, Halogen-free, High Tg, etc.,please view the below “Standard PCB” or contact sales rep.
Maximum PCB Size(Dimension) 500*1100mm (min 5*6mm) Any sizes beyond this dimension, please view the below “Standard PCB” or contact sales rep.
Board Size Tolerance(Outline) ±0.2mm/±0.5mm ±0.2mm for CNC routing, and ±0.5mm for V-scoring.
Board Thickness 0.2-2.4mm 0.2,0.4, 0.6, 0.8, 1.0, 1.2, 1.6, 2.0, 2.4mm. Please view the below “Standard PCB” or contact us if your board exceeds these.
Board Thickness Tolerance(t≥1.0mm) ±10% Normally “+ Tolerance” will occur due to PCB processing steps such as electroless copper, solder mask and other types of finish on the surface.
Board Thickness Tolerance(t<1.0mm) ±0.1mm
Min Trace 0.1mm/4mil Min manufacturable trace is 4mil(0.1mm), strongly suggest to design trace above 6mil(0.15mm) to save cost.
Min Spacing Min manufacturable spacing is 4mil(0.1mm), strongly suggest to design spacing above 6mil(0.15mm) to save cost.
Outer Layer Copper Thickness 1oz/2oz/3oz(35μm/70μm/105μm) Also known as copper weight. 35μm=1oz, 70μm=2oz, 105μm=3oz. Please view the below “Standard PCB” or contact us if you need copper weight greater than 3oz.
Inner Layer Copper Thickness 1oz/1.5oz(35μm/50μm) Inner copper weight as per customer’s request for 4 and 6 layers. Please contact us if you need copper weight greater than 1.5oz.
Drill Sizes (CNC) 0.2-6.3mm Min drill size is 0.2mm, max drill is 6.3mm. Any holes greater than 6.3mm or smaller than 0.3mm will be subject to extra charges.
Min Width of Annular Ring 0.15mm(6mil) For pads with vias in the middle, Min width for Annular Ring is 0.15mm(6mil).
Finished Hole Diameter (CNC) 0.2mm-6.2mm The finished hole diameter will be smaller than size of drill bits because of copper plating in the hole barrels
Finished Hole Size Tolerance(CNC) ±0.08mm For example, if the drill size is 0.6mm, the finished hole diameter ranges from 0.52mm to 0.68mm will be considered acceptable.
Solder Mask LPI Liquid Photo-Imageable is the mostly adopted. Thermosetting Ink is used in the inexpensive paper-based boards.
Minimum Character Width(Legend) 0.15mm Characters of less than 0.15mm wide will be too narrow to be identifiable.
Minimum Character Height (Legend) 0.8mm Characters of less than 0.8mm high will be too small to be recognizable.
Character Width to Height Ratio (Legend) 1:5 In PCB silkscreen legends processing, 1:5 is the most suitable  ratio
Minimum Diameter of Plated Half Holes 0.6mm Design Half-Holes greater than 0.6mm to ensure better connection between boards.
Surface Finishing HASL with lead
HASL lead free
Immersion gold,OSP
The most popular three types of PCB surface finish. Please view the below “Standard PCB” or contact us for other finishes.
Solder Mask Green ,Red, Yellow, Blue, White ,Black No extra charge (Green, Red, Yellow, Blue)
Silkscreen White, Black, None No extra charge.
Panelization V-scoring,
Tab-routing,
Tab-routing with Perforation (Stamp Holes)
Leave min clearance of 1.6mm between boards for break-routing. For V-score panelization, set the space between boards to be zero.
Others Fly Probe Testing (Free) and A.O.I. testing(free), ISO 9001:2008 ,UL Certificate No extra charge.